LED teraapia näomask

Before using the LED Therapy Face Mask, it is important to fully charge the battery.

• Unpack the LED Therapy Face Mask and check if all parts match those listed in the "Package Contents" section.
• To charge the mask, connect the USB-C cable to the control panel. Insert the USB plug into a power adapter and then plug the adapter into a power outlet.
• The three LED lights on the control panel will flash, indicating that charging is in progress.
• When the battery is fully charged, the battery indicator on the screen will remain solid. The estimated charging time is approximately 4 hours.

Common Skin Reactions

Immediately after the treatment, the skin may appear red. This is a normal reaction, and the skin should return to normal within 1-2 hours.

You must follow the instructions below before your first treatment session to see if you are light-sensitive:

• Secure the LED Therapy Face Mask to your face, allowing the LEDs to deliver light directly to your skin.

• Turn the LED Therapy Face Mask on (see the “Handling the device” section of the instructions) and wear it for 5 minutes. At any time, if your LED Therapy Face Mask feels HOT or uncomfortable, STOP using the device immediately.

• Wait for 24 hours, then try again.

• If you experience pain, discomfort, or redness that lasts for more than 2 hours, you might be light-sensitive. Please consult with a medical professional for advice.

For best results, we recommend 10-25 minute sessions, 2-3 times per week with a 2-day break for a minimum of 12 weeks.

• To maintain results, we suggest 1-2 treatments per week, with each session lasting 15-20 minutes.

1. Wipe or wash your facial skin and allow it to dry naturally.

2. Connect the LED Therapy Face Mask to the control panel.

3. The device turns on after holding the power button for about 2.5 seconds.

4. Select the desired color by pressing the M button. Red light (R), blue light (B), yellow light (Y), near-infrared (NIR)

5. Select the desired light intensity by pressing the E button. We recommend starting at a lower light intensity level and increasing it gradually. The higher the level of light intensity, the more energy is emitted.

6. Set the desired duration by pressing the T+ or T- button. Press “T-” to reduce the time of the procedure and press “T+” to increase the time of the procedure. The recommended time for one procedure is 10-25 minutes.

7. Press the NIR button to turn on or off near-infrared light.

8. Avoid looking directly at the light.

9. Put on the mask and secure it with the straps.

10. After the procedure, apply your normal skincare. Use sunscreen if you are doing the procedures in the morning.

11. Thoroughly clean the LED Therapy Face Mask after use.

12. Repeat 10-25 minute procedures 2-3 times a week. When you see the result, reduce the frequency to 1-2 times per week.

• Moisturize: Apply a hydrating serum or moisturizer for dry skin.
• Sun Protection: Use SPF if heading outdoors, as your skin may be more sensitive to sunlight post-treatment.
• Stay Hydrated: Drink plenty of water to support your skin’s natural healing process.
• Avoid Harsh Products: Refrain from using strong exfoliants or active ingredients immediately after your session.
• Clean Your Device: Wipe the mask with a soft, damp cloth to keep it hygienic for your next use.

• Keep the device away from high temperatures and humidity. Avoid storing the LED Therapy Face Mask in dusty environments, direct sunlight, or damp conditions.
• Store the LED Therapy Face Mask at room temperature in a dry environment.
• Always adjust the mask using the head straps, never by pulling on the cable that connects the mask to the controller.
• Handle the device with care to prevent accidental damage.
• Avoid pulling, yanking, or bending the cable that connects the LED Therapy Face Mask to the control panel.
• Note: After cleaning, we recommend storing the device in its original box or the included storage pouch.

Cleaning

Ensure that the LED Therapy Face Mask is unplugged and turned off before cleaning. Then, clean the face area of the mask with a damp, soft cloth using a gentle, alcohol-free cleanser. Repeat the cleaning process until the mask is clean, then dry it with a clean, dry cloth. Do not use alcohol, harsh chemicals, or acidic cleaners, as they may damage the mask and affect its performance.

This LED Therapy Face Mask is more than just a skincare device—it’s a results-driven solution personally tested and validated by our beauty specialist at Face by Greethel. As a brand that provides professional treatments using the very same products we sell, we deliver proven results you can trust.

Designed with advanced light therapy, the mask effectively reduces wrinkles, boosts collagen, and enhances your natural glow—all from the comfort of your home. Its ease of use, portability, and customer-approved performance set it apart. Plus, it’s backed by science and comes with a warranty for added confidence. When you choose this mask, you’re investing in a solution that’s trusted by professionals and loved by customers.

• DO NOT use this device to treat any other conditions apart from those listed in the indications for use. This device has not been tested for any other conditions than those listed, and the risk is unknown.
  
• DO NOT use this device if you are pregnant, planning on becoming pregnant or breastfeeding. This device has NOT been tested on pregnant or breast-feeding women and therefore the risk to the foetus, neonate or pregnant women is unknown.
  
• DO NOT use this device if you suffer from Lupus erythematosus, photosensitive eczema or Albinism. If you use this device system to treat Lupus erythematosus, photosensitive eczema or Albinism you may cause a severe skin reaction.
  
• DO NOT use this device if you suffer from any photosensitive disorder (sensitisation to light). If you use this device and you suffer from a photosensitive disorder you may cause a severe skin reaction.
  
• DO NOT use the device if you suffer from light-induced headaches.
  
• DO NOT use the device if you suffer from any genetic conditions of the eye.
  
• DO NOT use this device if you are taking any medication that can cause photosensitivity. If you use this device and you are taking any medication that can cause photosensitivity you may cause a severe skin reaction. Photosensitivity is a common side effect of various medications. These can include certain antibiotics, chemotherapy drugs, and diuretics. If you are unsure about any medication you may be taking consult your healthcare provider. Other substances not listed above can also cause photosensitivity. Common examples of these substances are St John's Wort, Coal tar, deodorants, antibacterial soaps, artificial sweeteners, naphthalene (moth balls), petroleum products, brightening agents found in laundry detergent, and cadmium sulphide (a chemical injected into the skin during tattooing.

• Net Weight: 320g
• Packaging Size: 43 x 23 x 4.5cm
• LED Lamp Bead: 240 
• Charging Time: 4-5 Hours
• Full Charge Usage: 1.5-2 Hours
• Adapter Input: 100-240V
• Adapter Output: 5V DC 3000MA
• Wavelengths: 

- Red Light: 630nm

- Blue Light: 460nm 

- Yellow Light: 590nm

- Near Infrared: 850nm